BabaCAD

Discussion in english => General discussion about BabaCAD => Topic started by: Ponytail on March 22, 2014, 01:26:59 pm

Title: Introducing
Post by: Ponytail on March 22, 2014, 01:26:59 pm

Hello members,

I would like to give a very tiny introduction of myself.
I am a retired Dutchman from just over 60 years and shortly working with CAD.
Used AutoCad2008 LT and it got me hooked. Specially since I can also use a laserplotter to cut cardboard.

Autocad is heavy and expensive. Found out BabaCad looks very similar.
Gonna do some tests to see if the files made can also being used with the laser.
This appears not always being the case...

Greetings from Holland,
PT

Title: Re: Introducing
Post by: Ponytail on September 05, 2014, 01:16:20 pm

In addition: I made little recommandation for BabaCad in a big computermagazine in Netherlands; Computer-Idee.
So maybe there will be some more activitye here soon....

Title: Re: Introducing
Post by: babadmin on September 07, 2014, 05:47:24 pm

Thanks for recommendation. BabaCAD makes it hard to reach many people cause this is no commercial project with no support at all. But there are good people like you who are helping to spread the news about this useful and free CAD tool.

Best wishes,
Mirza