BabaCAD
Discussion in english => General discussion about BabaCAD => Topic started by: Baba_cadguy on May 24, 2017, 08:49:47 pm
-
I just installed BabaCAD 2017 x64_2.0.0 and it crashes about half way through the initializing progress bar. I would like to try this out. Any suggestions? I can run a test or forward a log file to you if I know what you need.
Matt
-
Update graphics card drivers and restart BabaCAD. If same problem exists, check if you have two graphics card and switch from integrated card (often it's intel integrated low performance graphics) to hi-performance graphics card.
If you try to run BabaCAD on virtual machine like vmware, vbox,.. there can be problems as virtual machine graphics are not well supported with OpenGL.
-
I have only integrated graphics on my laptop (intel). Do I need to install or upgrade OpenGL? I'm not sure where to find OpenGL for my machine (Acer 1830T).
I ran OpenGL Extensions Viewer and I have OpenGL 2.1
(Current: 2.1.0 - Build 8.15.10.2189)
Core features
v1.1 (100 % - 7/7)
v1.2 (100 % - 8/8)
v1.3 (100 % - 9/9)
v1.4 (100 % - 15/15)
v1.5 (100 % - 3/3)
v2.0 (100 % - 10/10)
v2.1 (100 % - 3/3)
v3.0 (73 % - 17/23)
v3.1 (25 % - 2/8)
v3.2 (0 % - 0/10)
v3.3 (0 % - 0/10)
v4.0 (0 % - 0/14)
v4.1 (0 % - 0/7)
v4.2 (0 % - 0/13)
v4.3 (0 % - 0/23)
v4.4 (0 % - 0/10)
v4.5 (0 % - 0/11)
What version of OpenGL is required?
The BabaCAD window appears, looks good, but when the "initializing" progress bar reaches about half way, the program freezes and I have to close it. Is there a startup log I can check?
Thanks,
Matt
-
OpenGL version is ok, but you have to update drivers for you graphic card if there are vendor's bugs fixed in meantime. Also, can you tell me what's going in case when you install older BabaCAD version 1.3.4 (it's second download button on babacad.com website; it's 32-bit but also runs on all Windows versions)?
-
BabaCAD version 1.3.4 runs fine. No 3D though I think.
Matt
-
Also, I have the most recent factory drivers already. Unfortunately.
Matt
-
There is something weird, and I cannot realize what it is. I have already tested BabaCAD 2017 on several computers running Windows 7 Home Premium 64 bit and everything was fine. Maybe once more thing you can try, to go to properties of babacad.exe in explorer (Program Files/BabaCAD/BabaCAD) and select compatibility mode and try different options (vista, XP, ...), then restart BabaCAD 2017. It would be
pretty bad for you not to use a new BabaCAD 2017, as there are so many improvements and more better user interface in new version, but if not you must be satisfied with running old 32-bit version :(
-
I always get the same message, no matter what compatibility I pick:
Problem signature:
Problem Event Name: APPCRASH
Application Name: BabaCAD.exe
Application Version: 2.0.0.0
Application Timestamp: 58e18066
Fault Module Name: StackHash_1dc2
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 0000000000000000
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 1dc2
Additional Information 2: 1dc22fb1de37d348f27e54dbb5278e7d
Additional Information 3: eae3
Additional Information 4: eae36a4b5ffb27c9d33117f4125a75c2
I don't know if this helps.
Dr. Watson may have produced a more complete error dump, but I forget where they are stored.
-
I see it's not Dr. Watson anymore. Does this help?
Version=1
EventType=APPCRASH
EventTime=131404666007583927
ReportType=2
Consent=1
ReportIdentifier=34d884fb-43cc-11e7-8743-889ffa35a6be
IntegratorReportIdentifier=34d884fa-43cc-11e7-8743-889ffa35a6be
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=BabaCAD.exe
Sig[1].Name=Application Version
Sig[1].Value=2.0.0.0
Sig[2].Name=Application Timestamp
Sig[2].Value=58e18066
Sig[3].Name=Fault Module Name
Sig[3].Value=StackHash_1dc2
Sig[4].Name=Fault Module Version
Sig[4].Value=0.0.0.0
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=00000000
Sig[6].Name=Exception Code
Sig[6].Value=c0000005
Sig[7].Name=Exception Offset
Sig[7].Value=0000000000000000
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.768.3
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
DynamicSig[22].Name=Additional Information 1
DynamicSig[22].Value=1dc2
DynamicSig[23].Name=Additional Information 2
DynamicSig[23].Value=1dc22fb1de37d348f27e54dbb5278e7d
DynamicSig[24].Name=Additional Information 3
DynamicSig[24].Value=eae3
DynamicSig[25].Name=Additional Information 4
DynamicSig[25].Value=eae36a4b5ffb27c9d33117f4125a75c2
UI[2]=C:\Programs_OS\BabaCAD 2017\BabaCAD.exe
UI[3]=BabaCAD has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\Programs_OS\BabaCAD 2017\BabaCAD.exe
LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
LoadedModule[2]=C:\Program Files\AVAST Software\Avast\x64\aswhooka.dll
LoadedModule[3]=C:\Windows\system32\kernel32.dll
LoadedModule[4]=C:\Windows\system32\KERNELBASE.dll
LoadedModule[5]=C:\Windows\system32\OPENGL32.dll
LoadedModule[6]=C:\Windows\system32\msvcrt.dll
LoadedModule[7]=C:\Windows\system32\ADVAPI32.dll
LoadedModule[8]=C:\Windows\SYSTEM32\sechost.dll
LoadedModule[9]=C:\Windows\system32\RPCRT4.dll
LoadedModule[10]=C:\Windows\system32\GDI32.dll
LoadedModule[11]=C:\Windows\system32\USER32.dll
LoadedModule[12]=C:\Windows\system32\LPK.dll
LoadedModule[13]=C:\Windows\system32\USP10.dll
LoadedModule[14]=C:\Windows\system32\GLU32.dll
LoadedModule[15]=C:\Windows\system32\DDRAW.dll
LoadedModule[16]=C:\Windows\system32\DCIMAN32.dll
LoadedModule[17]=C:\Windows\system32\SETUPAPI.dll
LoadedModule[18]=C:\Windows\system32\CFGMGR32.dll
LoadedModule[19]=C:\Windows\system32\OLEAUT32.dll
LoadedModule[20]=C:\Windows\system32\ole32.dll
LoadedModule[21]=C:\Windows\system32\DEVOBJ.dll
LoadedModule[22]=C:\Windows\system32\dwmapi.dll
LoadedModule[23]=C:\Windows\WinSxS\amd64_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.7601.23721_none_1457f4f68b936a93\gdiplus.dll
LoadedModule[24]=C:\Windows\system32\VERSION.dll
LoadedModule[25]=C:\Windows\system32\MSIMG32.dll
LoadedModule[26]=C:\Windows\system32\COMDLG32.dll
LoadedModule[27]=C:\Windows\system32\SHLWAPI.dll
LoadedModule[28]=C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.18837_none_fa3b1e3d17594757\COMCTL32.dll
LoadedModule[29]=C:\Windows\system32\SHELL32.dll
LoadedModule[30]=C:\Windows\system32\WINSPOOL.DRV
LoadedModule[31]=C:\Windows\system32\oledlg.dll
LoadedModule[32]=C:\Windows\system32\OLEACC.dll
LoadedModule[33]=C:\Windows\system32\IMM32.dll
LoadedModule[34]=C:\Windows\system32\MSCTF.dll
LoadedModule[35]=C:\Windows\system32\WINMM.dll
LoadedModule[36]=C:\Windows\system32\apphelp.dll
LoadedModule[37]=C:\Windows\AppPatch\AppPatch64\AcGenral.DLL
LoadedModule[38]=C:\Windows\system32\SspiCli.dll
LoadedModule[39]=C:\Windows\system32\sfc.dll
LoadedModule[40]=C:\Windows\system32\sfc_os.DLL
LoadedModule[41]=C:\Windows\system32\USERENV.dll
LoadedModule[42]=C:\Windows\system32\profapi.dll
LoadedModule[43]=C:\Windows\system32\MPR.dll
LoadedModule[44]=C:\Windows\system32\uxtheme.dll
LoadedModule[45]=C:\Windows\system32\CRYPTBASE.dll
LoadedModule[46]=C:\Windows\system32\CRYPTSP.dll
LoadedModule[47]=C:\Windows\system32\rsaenh.dll
LoadedModule[48]=C:\Windows\system32\RpcRtRemote.dll
LoadedModule[49]=C:\Programs_OS\BabaCAD 2017\ExtensionModules\BabaCADLispExtension.bem
LoadedModule[50]=C:\Program Files\WIDCOMM\Bluetooth Software\btmmhook.dll
LoadedModule[51]=C:\Windows\system32\PSAPI.DLL
LoadedModule[52]=C:\Windows\system32\ig4icd64.dll
LoadedModule[53]=C:\Windows\system32\CLBCatQ.DLL
LoadedModule[54]=C:\Windows\system32\explorerframe.dll
LoadedModule[55]=C:\Windows\system32\DUser.dll
LoadedModule[56]=C:\Windows\system32\DUI70.dll
LoadedModule[57]=C:\Windows\system32\PROPSYS.dll
LoadedModule[58]=C:\Windows\system32\spool\DRIVERS\x64\3\PS5UI.DLL
LoadedModule[59]=C:\Windows\system32\spool\DRIVERS\x64\3\PSCRIPT5.DLL
LoadedModule[60]=C:\Windows\system32\mscms.dll
FriendlyEventName=Stopped working
ConsentKey=APPCRASH
AppName=BabaCAD
AppPath=C:\Programs_OS\BabaCAD 2017\BabaCAD.exe
-
Windows dump cannot help me a lot. I will try to find computer with intel integrated graphics card to test, as I'm sure 99% that's the problem.
-
Thank you. I really appreciate the help. Let me know if I can do anything to help. I will keep trying to figure out if I can install generic Intel drivers or something.
Matt
-
Matt,
Check: http://www.guru3d.com (http://www.guru3d.com) to find different / tweaked drivers. I'm trying myself to get my windows 10 dell laptop up and running for babacad.
Cheers, Remco
-
Thanks R2G.
Also, is there a minimum graphics memory requirement for BabaCAD?
-
There is no minimum requirements for graphics memory size, cause every graphic card in last 10 years supports OpenGL and has minimum 32 Mb of memory.