Recent Posts

Pages: 1 ... 8 9 [10]
General discussion about BabaCAD / Re: v 2.0.0 Errata
« Last post by Command Line on April 06, 2017, 05:00:50 pm »
7,8,11,12,13 and possibly 5 are items I can add to the list of commands through lisp now that I know where to look for the formal command definitions, and I plan to get to it today. Thanks for your response, and I really do want to donate money to the cause. I can do lisp, but editing an executable is beyond my expertise so I want to help where I can.
General discussion about BabaCAD / Re: v 2.0.0 Errata
« Last post by babadmin on April 06, 2017, 09:54:32 am »
Thank you for your interest in BabaCAD. I must say that you are just second person who offer to donate for BabaCAD, and BIG thank to you for that, but I cannot accept it, cause I have not accepted from the first guy (also one american, that was 3 years ago) and it's obvious that donation from two guys can't help much in BabaCAD development. But, your review is maybe more valuable for me and for other users, so I must say thank you again.

Now, i will try to anwser to your questions:

1. commands defined with lisp DEFUN function and loaded by APPLOAD will run if typed in Dynamic Entry Box, but auto-complete can't find it cause it's populated at the start of  BabaCAD (i will see in next service pack update to solve this, so auto-complete to know about these commands too).

2. Will fix it,

   a) Z coordinate is displayed and editable in properties pane only for 3D objects like LINE, POINT, 3D POLYLINE, but not for circle, arc, 2d polyline...
   b) to see or get access to n-th vertex of polyline/3dpolyline, just select it and type vertex index (for example 5 for 5th vertex) in "Vertex" field in Properties pane
       or select polyline and once click on vertex which coordinates wants to be displayed in Properties pane (X,Y,Z coordinates) like as you want to move vertex (and
       cancel move by type "Esc" or just click on same snaped vertex coordinate). After that you can also edit coordinates of selected vertex.
   c) you can change Z coordinate of all vertices of 3d polyline object: first type -1 in Vertex field (top field in Geometry section of properties pane for 3d polyline
   object), then type value in Z field. All vertices will move to that Z coordinate.

4. Will fix it,

5. Polyline, 3D polyline and Spline edit are included, just with different command name (also look for icons at Ribbon bar at right). PLINEJOIN, PVERTEXADD,

6. Solution in 3. (I will check if bug exists for moving z-coordinate by typing in command line).

7. I don't understand this. SAVE and SAVEAS exists, just click on BabaCAD icon on top-left (there is also New, Open, Print....)

8. I can put distance command later, but you have properties pane LENGTH, then DIMALIGNED, then you stand on grip point and length of line/polyline segment will
    be displayed also

9. Ortho is depricated cause you have object tracking feature (OTRACK) which is more usable and it's replacement for ortho, so just follow tracking lines...

10. no FILEDIA

11. there is LIST command, maybe it's not included in auto-complete (type LIST in command line)

12. UNITS are welcome, will be there soon (I hope)

13. I put some options in menu (ribbon) bar, but if you like to change options in dialog, ok, will add it

14. Thank you for sharing this LISPS with other users. I also think that many automation tasks can be made using lisp, I just don't have a time for scripting.
      Forgot to tell that these commands or any other .lsp script can be loaded automatically at startup if you edit bcad.mnu file in \Program
      Files\BabaCAD\BabaCAD\Support folder.

General discussion about BabaCAD / v 2.0.0 Errata
« Last post by Command Line on April 06, 2017, 08:03:03 am »
I'm new to BabaCAD, but a longtime CAD user with a modest level of LISP development. I was referred here by a friend who is also a lisp guru with the CAPD tools used by the BLM and Forest Service in the U.S.

I have run into a number of issues with the 2017 release, but let me first say a big thank you for doing this. I am working on a bicycle part invention in the evenings on my own and I am at a point where I need to have a mounting bracket made with a CNC mill.

That said, I hope this commentary is helpful for improving the product and I am interested in donating some money for your continued efforts and commitment.

Now the issues:
1. The commands I loaded through appload will run on the command line but not in the dynamic entry box
2. The space bar does not equal enter in the dynamic entry, but it would be nice if it did--kind throws me off
3. The object properties pane does not display a global elevation for objects, but the dxf does populate a value of 0 for the "30" dxf code. I really need this fix to be able to export a gcode file for a CNC mill. Also, the properties pane for 3d polylines only shows the elevation for one vertex at a time. A global elevation field would be helpful even if it displayed *VARIES* for vertices at differing elevations. Of course it would be helpful to change the elevation of all of the vertices for selected objects using this field.
4. I'm running Windows 10 and downloaded the BabaCAD exe install earlier today. I drew a 3d poly and then typed C for close, and it appeared to close. But there were two issues. a) when selected, the Is Closed value in the properties pane displayed as No b) When I saved and reopened the drawing, the closing segment was gone.
5. The PEDIT command and JOIN command are not included to allow me to join a line to a polyline. Nuts.
6. I drew a rectangle 90mm x 45mm in the xy plane, then I copied and pasted it into the same place. I executed the move command and selected the topmost rectangle, then pressed enter, entered 0,0,0 for the base point and 0,0,45 for the destination point. The object disappeared completely. I tried this more than once with both a 2d and 3d polyline. Same result.
7. "SAVE" and "SAVEAS" commands do not appear in the library so far as I can tell. These are essential if a user wants to save to a newer version after having made some tentative changes that might not be best to make permanent.
8. There does not appear to be a DISTANCE command (DI typical shortcut) to just screen print the distance between two points of interest.
9. F8 is the Ortho on / Ortho off toggle that I am accustomed to. Is ortho mode even available at all?
10. FILEDIA is a CAD global variable. I did not see that it is defined. I think the domain of valid values are 0 and 1, maybe a 2, but I can't think of what that would be used for. I believe 0 returns a command line dialog for file saving and 1 returns a popup GUI.
11. I also did not see the LIST command as defined.
12. Did not see a UNITS command or dialog as loaded (UN typical shortcut)
13. OP or OPTIONS also did not seem to be a valid command.
14. I took the liberty to develop a lisp file of common aliases for commands that I use frequently. I hope it is of some use to you. I plan to also develop the lisp to combine the COPY and PASTE commands to work just like in CAD. Here is the code I can share so far:
Code: [Select]
;; command aliases

(defun c:c ()
 (command "circle"))

(defun c:e ()
 (command "erase"))

(defun c:l ()
 (command "line"))

(defun c:m ()
 (command "move"))

(defun c:u ()
 (command "undo"))

(defun c:ss ()
 (setq CurrentSelection (ssget)))
General discussion about BabaCAD / Re: not precision
« Last post by MufasuCAD on April 04, 2017, 01:17:22 am »
yaa :D,,, btw its a good cad software,,, need more a bit upgrade for some tools,, to make it very best for 2d drafting :D
General discussion about BabaCAD / Re: not precision
« Last post by babadmin on April 03, 2017, 06:14:21 am »
I see you didn't understand me. There is no new release, I fixed it already (faster than a roadrunner). I withdraw Sunday setup with this new one. Just download again and re-install BabaCAD 2017. Otrack now works for LINE command too (that is what you looking for).

I know it sounds weird, but this BabaCAD software is not only dynamic by itself, but it's author is too. For comparison, try imagine this situation with Autodesk for example. You find some small bug (or a way to improve drafting) and e-mail to Autodesk (or some other big company producing CAD software). You may get answer for a week or two, but then you ask them to fix that. Ha ha, they would only laugh. You can expect that fix for about few years, and here you got your wish in about 45 min.

General discussion about BabaCAD / Re: not precision
« Last post by MufasuCAD on April 03, 2017, 01:14:47 am »
nice,, let me know the new release,,, and i will make basic tutorial for your apps on my channel.
General discussion about BabaCAD / Re: not precision
« Last post by babadmin on April 03, 2017, 12:46:43 am »
Nice suggestion. Thank you. I must admit that thing always pissed me off. I fixed it and now you can tell that BabaCAD 2017 had to move release date from April 2th to April 3th, as now it's 1.00 AM in Sarajevo :) (I will put a new setup file for about 30 min).

Have a good drafting

Everyone who downloaded BabaCAD 2017 at Sunday must re-download and re-install it on Monday (first remove version that is already installed).
General discussion about BabaCAD / not precision
« Last post by MufasuCAD on April 02, 2017, 11:42:54 pm »
im tested you apps n its good,, but there is no tracking otrack for first drawing single line object,, so i got no precision dimension. As example i draw rectangle object by using line command. height 90 and width 89.. for the last width i got 88.85 n with 90 degree,, its not precision result. Can you fix it, or add tracking otrack when draw single line.

General discussion about BabaCAD / Re: How to enable trace log?
« Last post by babadmin on February 23, 2017, 11:46:35 pm »
It's plugin log, independent from BabaCAD. Maybe I haven't enabled it in that plugin version. I will add option in .ini file to enable error log in next plugin release.
General discussion about BabaCAD / Re: How to enable trace log?
« Last post by demetrio on February 23, 2017, 12:56:22 pm »
Didn't find that file. I'm using v 1.3.5 (beta? I don't know, I can't see it in About menu option)
Pages: 1 ... 8 9 [10]